Thank YouWelcome, Jack. Enjoy your stay.
Our resident guru crash test dummy might know. I’m traveling atm and don’t have access to all my wiring diagram pdf’s.
Thank You These are for a newer cart but are helpful in my learningnot sure if this helps...but attached a couple pdf's. As far as turning the BB into 2wheel drive not sure why you would want to but thats a bit beyond my expertise but perhaps crash test dummy might know.
The front controler field cables shorted and burned it upi have nnever heard of anyone going back to 2 wheel drive
i have nothing in my manuals on the badboy buggiees . sorry
Thanks,ok i just looked over the diagram outl4w posted
your cart is a 2012 ,,, and voltage ??
what do you gauge your abilaty to read diagrams ?
I see nothing that would stop you from running just the rear motor
WARNING
ALL TESTING IS TO BE DONE WITH CART ON JACK STANDS WITH ALL WHEELS OFF THE GROUND !!!
remove the A1, A2 , AND S1 cables off front moter the S2 cable stays on to act as a juction
connect the S2 rear moter cable (green) to the auto / 4wd switch as shown
it looks very stright forward from there
here is how i would try
and let me say... this is only an idea how i might do it .. i take no responcabilty if it blows up View attachment 709
Thanksi would go with the 8 volts as they will give the best run time
i am finding the set up for the 48v bab boy is 8 6v batteries
here is 8v cables
12v cables
and the 6v batteries
View attachment 732
your main positive will go to B+ on controller
your main negative will go to B- on controller
your charger will also hook up to the main negative and positive
if you are buyng cables try to get better than 6G
4G is 0G welding cables are over kill
I was thinking about using 2 ga and making themif you are buyng cables try to get better than 6G
4G is what i run
0G welding cables are over kill
In contact with host...server backups for some reason are 10x larger than the disk space the forum allocates causing “disk space full” error.What the HELL happened